Sensor Networks smartPIMS
September 11, 2019
Waygate Krautkramer USN 60 / USN 60L Flaw Detector (Discontinued)
September 11, 2019
Waygate Krautkramer USLT Series Flaw Detector
The Waygate Krautkramer USLT USB is a development of the USLT 2000, the ultrasonic flaw detection system which is widely used throughout the automotive sector in spotweld checking. It retains all the features and benefits of the field-proven USLT 2000 but is supplied with a USB interface. This will allow easy connectivity for all users and the modification has been implemented to meet market needs.
The Waygate Krautkramer USLT USB is a development of the USLT 2000, the ultrasonic flaw detection system which is widely used throughout the automotive sector in spotweld checking. It retains all the features and benefits of the field-proven USLT 2000 but is supplied with a USB interface. This will allow easy connectivity for all users and the modification has been implemented to meet market needs.
Details
State-of-the-Art Electronics
Extreme miniaturization of the electronics, allowing efficient maximization of performance, is the essence of the USLT USB. And maximization of performance does not just mean high measuring accuracy and a wide frequency range. It also means the incorporation of features which allow you to customize the instrument to meet your specific application needs.
This includes:
- A choice of echo display mode to assist evaluation
- The ability to superimpose a stored test display onto a live A-scan to compare results
- The ability to record echo dynamics and simultaneously display real time signals
- The availability of adjustable signal averaging
- DGS curves are available for all valid equivalent reflector sizes and probes with DGS capability
- Can use both DAC and TCG
As such, the USLT USB offers universal evaluation options for detected indications to meet both national and international test specifications.
Specifications
Enclosure
Storage temperature – –20 … +60 °C
Operating temperature – –10 … +50 °C
Dimensions (W × H × D) – 25 × 183 × 85 mm; 0.98″ × 7.2″ × 3.35″
Weight – approx. 0.6 kg
Protection rating – IP 41
Shock resistance – max. 15 g, 11 ms, according to IEC 60068-2-27
Vibration resistance – 5 … 150 Hz, max. 2 g, 1 oct./min, according to IEC 60068-2-6 Fc
Connections
Probes – 2 × LEMO 00 Triax
I/O interface – LEMO 1B, 10-pin socket
Power supply connector – LEMO 0S, 2-pin socket
USB – USB socket type B
Ultrasound
Pulser type – Spike pulse
Pulse repetition frequency (PRF) – max. 1,000 Hz, 3 settings (depending on the calibration range), continuous setting approx. 8 … 1,000 Hz., no continuous pulse sequence.
Voltage – max. 400 V
Charging capacitor – 1 nF, 220 pF
Initial pulse rise time – < 15 ns
Damping – 50 Ohm, 1 kOhm
Probe mode (TR) – On/Off, through-transmission
