Danatronics EHC-09 Corrosion Thickness Gauge

Details

Features:

• Live Simultaneous Color Waveform and Thickness Display
• Vibration and color change on alarm
• Control of Gain, Blanking, Range, RF and Rectify Modes
• Available in Multiple Models
• Sunlight Readable color display
• IP54 rated
• 100k alphanumeric Datalogger with file compare and export to Microsoft excel
• B-Scan – with optional magnetic wheel encoder
• Made in USA

Typical Applications:

• Boiler Tubes
• Pressure Vessels
• Storage Tanks
• Ship Hulls
• Containers
• Home Oil Tanks
• Pipes
• Steam Lines
• Compressors
• Shafts

Specifications

Size: 5″ (127mm)(L) x 3″(76.2 mm)(W) x 1.25″ (31.75 mm)(H)

Weight: 8 OZ (.23 kg)

Thickness range: 0.020 – 20 inches (.50 mm – 508 mm) in steel, depending on material, temperature and transducer selection

Material Velocity Calibration Range: 0.0200 – 0.7362 in/uS (0.508 – 18.699 mm/uS)

Temperature: Gage Operating: -4° F to 122° F (-20° C to 50° C) High temperature transducers available for material temperatures from -5° F to 950° F (-20° C to 510° C)

Battery life: 8 -14 hours (depends on operating conditions)

Battery type: 2 “AA” Alkaline

Color Display: 170 X 220 pixels, high resolution TFT color display, sunlight readable

Language support: multi language of English, French, Spanish, Italian,Czech, German, Portuguese, Slovak, Finnish, and Hungarian

Information displays: Loss of signal (LOS), min, max, large reading while displaying min at the same time, velocity, zero, calibration, units, freeze, unfreeze, % battery life remaining, gain – low, std, high, echo to echo symbol

Resolution: .001″ (.01 mm), .01” (.1 mm)

Probe Recognition: Via pick list from a menu

Delay line zero measurement: Auto at power up with listed numeric value. Ideal for correcting delay line wear/curvature and for transducer acoustic drift at elevated temperatures

Package: IP54 Rated, Custom, splash-proof, high impact plastic with illuminating rubber keypad for go/no-go testing

Bandwidth: 0.5-20 MHz (-3dB)

Units: English/Metric/Microseconds

Gain: Low, Standard and High for varying test conditions (for gages without a waveform) or 1 dB steps from 20-90 dB or Automatic Gain Control (AGC) for gages with a waveform

Differential Mode: Displays the difference from the actual thickness measurement in absolute or percentage of a user entered reference value

Alarms: Minimum/Maximum depth, vibrates, beeps and display flashes as well as keypad illumination

Illuminating keypad: F1 = Red, F2 = Yellow and F3 = Green for easy, go/no-go testing

Ergonomics: User selectable lefty or rightly display changes via keypad

Backlight: Light Emitting Diode (LED), On/Off or Auto On based on valid readings or last key press

Shut off: Auto, user programmable time out (1-31 minutes), after no reading/key press or never shut off

Protective Pouch: Custom molded pouch with belt clip and wrist strap for either lefty or righty operators (optional, standard with DLC and DLCW).

Transport case: Hard Plastic with high density molded foam cut out for gage and most accessories

Freeze mode: Freezes display (ideal for high temperature applications)

Hold mode: Holds display to retain last thickness reading

Standard EHC-09 Wave Series includes: Ultrasonic thickness gage, DKS-537, 5 MHz 0.375 inch diameter potted cable, operational manual, Data XL interface program, couplant, and transport case. See chart below for standard inclusions for each gage

Warranty: Limited 2 year warranty on parts and labor for gage only under normal use

Transducers: A wide variety of dual transducers from 1-10 mhz, high temperature duals, delay lines and pencil probes

Documentation

Danatronics EHC-09 Color Manual

Danatronics EHC-09 Brochure