Newage AB9000 Brinell System (Discontinued)
October 19, 2019
Clark CRM/CTM Series Rockwell Tester
October 19, 2019
King Portable Brinell Tester
The King Portable Brinell Tester is a popular, manually-controlled tester that meets ASTM E-110. This lightweight, portable tester is ideal for virtually any size or shape of metal specimen. Simply place the specimen between the anvil and test head; manually crank the test head downward onto the specimen; and apply the desired load using the hydraulic lever.
The King Portable Brinell Tester is a popular, manually-controlled tester that meets ASTM E-110. This lightweight, portable tester is ideal for virtually any size or shape of metal specimen. Simply place the specimen between the anvil and test head; manually crank the test head downward onto the specimen; and apply the desired load using the hydraulic lever. Overload protection is standard. The tester applies up to 3000 kg load on a 10mm ball, making a visible indentation that is readable with any standard Brinell scope. The calibrated accuracy is better than 0.5% of the applied load
The King Portable Brinell Tester is available with load measurement systems from 62.5 kgf up to 3000 kgf with variations for extended rams or with a chain adapter. The chain adapter is used for large cylinder samples, it secures onto the test head and wraps around the specimen holding the specimen securely during the test procedure. The test head may also be supplied with an extended ram length. The extended length is ideal for recessed areas or over raised edges. Other options include a reverse direction load adapter used for measuring inside diameters on pipe, tube, etc.
Details
ACCURATE
- Manufactured to exacting tolerances ensuring consistent, repeatable results
- Certifications/Standards ASTM E-10, ASTM E-110, ISO 17025
- Calibrated with traceability to NIST
- Calibrated to build, then release, a load of 3000 kgf of pressure
- Permanent impression can be checked and rechecked
- 360° orientation and self-alignin
DURABLE
- Stroke limiter for reduced operator error and provides consistent performance between operators
- One-year limited warranty
- Calibration and service plans available
- Tungsten carbide ball certified for density and roundness
VERSATILE
- Can be used in any position; right side up, upside down, or even sideways
- Portable so either the part can be moved to the tester or you can take the tester to the part
- Lightweight and easy to maneuver
- Fully interchangeable with multiple bases
- Only one operator required
- Flat, dome and “V” anvils supplied as standard equipment
Specifications
SPECIFICATIONS
- Operation Method/Principle: Brinell (tungsten carbide ball with a manual hydraulic applied load)
- Certifications/Standards: ASTM E-10, ASTM E-110, ISO 17025 Dimensions & Weight: 23.5” x 11” x 12”; 38 lbs.
- Scales: HB30, HB15
- Loads: 62.5 kgf to 3000 kgf
- Load Application: Manual
- Tester Base Capacity: 4” horizontal reach and 13.5” vertical (larger bases available)
OPTIONS
- Long Ram Test Head for easy access into recessed areas or over raised edges.
- Low Pressure Test Head for softer metals, can be calibrated to release loads of 62.5 kgf, 125 kgf, 250 kgf, 500 kgf, 750 kgf or 1000 kgf.
- Chain Adapter for testing an unlimited range of differently sized parts. Comes with 4’ of chain. Longer lengths available.
- C-1 Standard Base – 13 1⁄2” Gap with 4” Throat for metal or round parts with a max. dia. of 8”.
- C-5 Base – 13 1⁄2” Gap with 6” Throat for wide parts including pipes with a max. dia. of 12”.
- C-6 Base – 20” Gap with 4” Throat for tall parts, such as pipes with large openings.
- C-7 Base – 20” Gap with 6” Throat for your largest parts on the shop floor or in the field.
